Beyerdynamic Pro X Lightning Cable for iPhone / iPad
BEYERDYNAMIC
Beyerdynamic Pro X Lightning Cable for iPhone / iPad
BEYERDYNAMIC
Description / Beyerdynamic Pro X Lightning Cable for iPhone / iPad
|
The PRO X Lightning cable is compatible with Apple devices which use a Lightning connector. For USB-C devices, check out the USB-C version of this cable. |
The PRO X Lightning cable provides professional audio quality on iPhone, iPad or iPod with Lightning connection, perfectly adapted for the Mini-XLR connection of the DT 700 PRO X, DT 900 PRO X, DT 1770 PRO and DT 1990 PRO studio headphones.
The integrated Digital-to-Analogue converter (DAC) makes it possible to change between different end devices while maintaining a consistently high audio quality. The integrated microphone allows using the headphones for phone calls. The volume or playback of tracks can intuitively be controlled via the integrated remote control.
Selected materials make the PRO X Lightning cable ideal to complement the PRO X or PRO headphones with a 3-pin mini XLR connection. The 1.6 metre cable can be locked to the headphone housing. The remote control and the condenser microphone are integrated in a durable aluminium housing. The IP65 certification also confirms protection against splash water.
Features
-
Apple Lightning to 3-pin mini XLR (lockable)
-
Direct connection between headphones
and compatible Lightning devices (MFI certified)
-
Professional audio quality due to high-end DAC
-
Including remote control and integrated condenser microphone
-
Splash-proof (IP65 certification)
Specifications
Cable / DAC Specifications
|
Frequency response |
4 – 24,000 Hz |
|
Nominal impedance |
0.35 Ω |
|
Output power |
4 mW @ 250 Ω 21 mW @ 48 Ω |
|
T.H.D |
0.003% |
|
Signal-to-noise ratio |
113dB |
| Channel Separation | 69dB |
|
Compatible with EN 50332 |
Yes |
| Cable Length | 1.6m |
| Weight | 45g |
|
Cable side |
single-sided left, detachable |
|
Connection headphones |
mini XLR (3-pin) |
|
Connection end device |
Apple Lightning |
|
Degree of protection |
IP65 |
Microphone Specifications
|
Transducer type |
electret condenser |
|
Polar pattern |
omnidirectional |
|
Microphone sensitivity |
-17 dBFS/Pa |
Lightning
|
USB version |
none, using Apple Lightning audio protocol |
|
DAC |
Apple A2M |
| Max. sampling rate | 48 kHz / 24 bits |
| Supported audio file formats | depends on source device |